Smoke Filters
Oil Skimmers
Dust Collectors
Dry Dust Collectors
Oil Mist Collectors
Oil & Coolant Mist Collector
Oil & Welding Smoke Filters
Contact:
B / 56, Rajashri Shahu Soc.,
Pune Satara Road,
Maharashtra, India
Telefax : + 91- 20- 24220768
Mobile : 98222 56661
Click Here to email us
|
| |
|
|
|
Oil & Coolant Mist Collectors
Advantages at a glance : Working clean breathing healthy
|
 |
-
Compact construction
-
Minimum space required (Æ 450mm, Length 500mm)
-
Ideal for a flexible fabrication
-
High suction capacity
-
Mounting on top of machining centers possible
-
Utmost separation efficiency for aerosols
-
Suitable for 3-shift-operation
-
Large quantities of cooling lubricant get recycled
-
The effort for maintenance is low and easy
-
Simple installation
-
Wide range of accessories
-
Special secondary filters are available for top mounting
-
Unit appears as modem industrial design
|
| |
These considerations justify an additional investment about 1% of the machine investment.
Optional cooling lubricant mist separators are falsely considered as factor only. A closer examinations shows hat 17% of the work piece cost is the proportional cost for cooling lubricant (Source DC, Stuttgart) and that the features of mechanical separators like, long service time, low expenditure for maintenance, long life time, clean machine rooms, clean workplaces and most important reducing the health hazard to workers.
Air Pel Invironment Techology
Supplies cooling lubricant mist separators since many years as partner of the machine tool manufacturers for almost every application. Air Pel supplies these separators direct to the machine, as well as to final customers.
|
Technical Specification:
Type |
C-7 |
C-15 |
C-21 |
C-29 |
C-35 |
Nominal Flow M3 /hr |
420 |
900 |
1260 |
1740 |
2100 |
Electrical HP Power Characteristics Phase of Oil Mist Collector |
0.75
Three Phase |
1.5
Three Phase |
2.0
Three Phase |
2.0
Three Phase |
3.0
Three Phase |
Noise Level at 1M db A |
52 |
58 |
62 |
64 |
68 |
Weight Kg |
45 |
48 |
48 |
52 |
56 |
|
| |
| |
|
|
 |
|
Modern Machining Centers belong to the technically advanced products of the Indian industry. The improvement of productivity factors like machining precision, machining time, set-up time and amortization are important criteria for the selection of a certain type of machine. The present tooling methods in modern machining centers allow high performance metal cutting with the need of cooling lubricants in many cases.
Optional cooling lubricants mist separators are falsely considered as cost factor only. A closer examination shows hat 17% of the work piece cost is the proportionate cost for cooling lubricant (Source DC, Stuttgart) and that the features of mechanical separators like, long life time, clean machine rooms, clean workplaces and most important reducing the health hazard to workers. These considerations justify an additional investment. |
| |
|
|
Summary:
- Very compact Air Pel oil and emulsion mist separator
- Proved wire mesh filter can be regenerated
- 97.99% of the cleaned air can be returned to the working areas i.e. there are no restrictions regarding the location of metal machining centers
- Maintenance at long intervals and easy to handle (After 6 months Cleaning)
- Modern industrial design
|
|
|
| |
|
|
 |
|
Oil mists from machining operations are hazardous to human health and may contribute to various health concern such as shown below.
Oil mists contain sulfer and lead, and inhaling them over an extended period of time may cause respiratory illnesses as larynx cancer, skin or eye diseases.
Poor indoor air quality can hurt the image of a company, reduce productivity, increase worker’s compensation claims and violate OSHA regulations.
|
| |
|
|
|
|
|
|
Don't See What you want? Call Us! Custom Manufactured Solutions are our Speciality!
|
| |
|
|
